Mitsubishi GOT1000 Series - Setting Communication Interface (Communication Settings)

27.4 Ethernet Connection
27.4.5 Setting communication interface (Communication settings)
27 - 67
25
BAR CODE READER CONNECTION
26
PRINTER CONNECTION
27
CNC CONNECTION
28
MULTI-CHANNEL FUNCTION
29
FA TRANSPARENT FUNCTION
30
MULTIPLE-GT11 CONNECTION FUNCTION
31
GATEWAY FUNCTION INDEX
27.4.5 Setting communication interface (Communication settings)
Make the GOT communication interface settings on [Communication setting] of GT Designer2.
Select the same communication driver as the one installed on the GOT for each communication interface.
For details on [Communication setting] of GT Designer2, refer to the following manual.
GT Designer2 Version Screen Design Manual
1 Communication settings
1 Set "1" to the channel No. used.
2 Set the driver to "QJ71E71/AJ71(Q)E71".
3 Perform the detailed settings for the driver. ( Communication detail settings)