28.3 Preparatory Procedures for Monitoring
28.3.7 Checking for normal monitoring
28 - 13
25
BAR CODE READER
CONNECTION
26
PRINTER CONNECTION
27
CNC CONNECTION
28
MULTI-CHANNEL
FUNCTION
29
FA TRANSPARENT
FUNCTION
30
MULTIPLE-GT11
CONNECTION FUNCTION
31
GATEWAY FUNCTION INDEX
2 Checking procedure except for system alarm
Checking procedure except for system alarm differs according to the connection type.
For the checking procedure of each connection type, refer to the following manual.
Each chapter indicating the Checking for normal monitoring
All settings related to communications are complete now.
Create screens on GT Designer2 and download the project data again.
To Next Page
Loading...
