Name: Mitsubishi GOT1000 Series
Brand: Mitsubishi
Rating: 4 (1 reviews)

To Next Page

To Previous Page

29 - 14

29.4 Preparatory Procedure for Accessing

29.4.3 Verifying GOT recognizes connected equipment

(1) Transmission speed between PC and GOT

Match the transmission speed setting between the PC and the GOT with the

transmission speed set on the PC side.

(2) To change the communication interface setting on the utility

The communication interface setting can also be changed on the utility.

For details on the utility, refer to the following manual:

GT User's Manual

1 After powering up the GOT, touch [Main

Menu] [Communication setting] from

the Utility.

2 The [Communication setting] appears.

3 Verify that the following communication

driver name is displayed in the box for

the communication interface to be used.

•Host(PC)

4 When the communication driver name is

not displayed normally, carry out the

following procedure again.

Section 29.4 Preparatory

Procedure for Accessing

Questions and Answers:

Need help?

Do you have a question about the Mitsubishi GOT1000 Series and is the answer not in the manual?

Mitsubishi GOT1000 Series Specifications

General