30 - 10
30.3 Preparatory Procedures for Monitoring
30.3.3 Setting communication interface (Communication settings)
(2) MELSEC-FX
(1) Communication interface setting by Utility
The communication interface setting can be changed on the Utility's
"Communication setting" after downloading "Communication setting" of project
data.
For details on the Utility, refer to the following manual.
GT User's Manual
(2) Precedence in communication settings
When settings are made by GT Designer or the Utility, the latest setting is
effective.
Item Description Range
Transmission Speed
Set this item when change the transmission speed used for
communication with the connected equipment.
<Default: 38400bps>
9600bps, 19200bps,
38400bps, 57600bps,
115200bps
To Next Page
Loading...
