Mitsubishi GOT1000 Series - Page 150

4 - 10
4.1 System Configuration
4.1.4 Connecting to QnASCPU type
2 System equipment
(1) GOT
*1 Connect it to the RS-232 interface (built into GOT).
(2) PLC
*2 For the system configuration on the serial communication module side, refer to the following manual.
• Serial Communications Module User’s Manual (Modem Function Additional Version)
• Computer Link Module (Com. link func./Print. func.) User’s Manual
Image No. Name Model name
RS-232 interface
• For RS-232 communication
(Built into GOT)
RS-232 Communication Unit
• For RS-232 communication
GT15-RS2-9P
RS-422 conversion unit
*1
• For RS-422 communication
GT15-RS2T4-9P
RS-422/485 Communication Unit
• For RS-422 communication
GT15-RS4-9S
RS-422 interface
• For RS-422 communication
(Built into GOT)
Image No. Name Model name
Serial communication module
*2
A1SJ71QC24, A1SJ71QC24N
A1SJ71QC24-R2, A1SJ71QC24N-R2
Computer link module
*2
A1SJ71UC24-R2, A1SJ71C24-R2, A1SJ71UC24-PRF,
A1SJ71C24-PRF
A1SJ71UC24-R4, A1SJ71C24-R4
RS-232
RS-232
RS-232
RS-232
RS-422/485
RS-422/485
RS-422