Mitsubishi GOT1000 Series - Page 484

12 - 8
12.2 Connection Cable
12.2.1 RS-232 cable
12.2.1 RS-232 cable
The following shows the connection diagrams and connector specifications of the RS-232 cable used for
connecting the GOT to a PLC.
1 Connection diagram
(1) RS-232 cable 1)
*1 GT15: CD, GT11: NC
(2) RS-232 cable 2)
*2 GT15: CD, GT11: NC
GOT side
Cable connection and signal direction
TOSHIBA product side
Signal name Pin No. Pin No. Signal name
CD/NC
*1
1 1SG
RD(RXD) 2 2RXD
SD(TXD) 3 3TXD
ER(DTR) 4 4
SG 5 5SG
DR(DSR) 6 65V
RS(RTS) 7 7RTS
CS(CTS) 8 8
9 95V
GOT side
Cable connection and signal direction
TOSHIBA product side
Signal name Pin No. Pin No. Signal name
CD/NC
*2
1 1
RD(RXD) 2 12 RXD
SD(TXD) 3 5TXD
ER(DTR) 4 7SG
SG 5 8SG
DR(DSR) 6 15 SG
RS(RTS) 7 6RTS
CS(CTS) 8 14 CTS
9 13