14 - 36
14.4 PLC Side Setting
3 Connecting to the computer communication unit
*1 Indicates only the transmission speeds that can be set on the GOT side.
*2 Set the same transmission speed of the GOT.
For the transmission speed setting of the GOT, refer to the following.
Section 14.3.3 Setting communication interface (Communication settings)
*3 The setting range varies with the connected PLC.
Item Setting
Transmission speed
*1*2*3
4800bps, 9600bps, 19200bps
Data length 8bit
Stop bit 1bit
Parity bit Odd
Parity check Yes
Control signal Invalidate CS, CD
To Next Page
Loading...
