Before using VJ-1617H OPERATION MANUAL
3-96
2. Perform rough adjustment when the degree of misalignment is big.
3.7.1.2 Standard rough adjustment pattern
Perform micro adjustment when the degree of misalignment is small.
3.7.1.3 Standard micro adjustment pattern
• Perform rough adjustment first when the degree of misalignment is difficult to determine.
3. Print out the confirmation pattern again and check if the printer has been adjusted properly.
3.7.1.1 Standard confirmation pattern
4. If it has not been adjusted yet, return to step 2.
• Perform micro adjustment if the printer is not fully adjusted after rough adjustment.
3.7.1.1 Standard confirmation pattern
Print out the confirmation pattern of the print mode in the user type setting which is currently set.
1. Turn ON the printer and load the roll media.
3.5.5 Setting roll media
2. Display the Printing mode menu on the operation panel.
a. Press the [Menu] key on the operation panel.
• "Menu 1: Sleep Mode>" is displayed on the operation panel.
b. Press the [+] key or [-] key on the operation panel to select the “Menu 2: User Type”.
To Next Page
Loading...
Need help?
General