Maintenance VJ-1617H OPERATION MANUAL
6-54
6.6 Disposal the waste fluids
The timing and method for the disposal of waste fluid are described below.
(1) Disposal timing
Dispose the waste fluids in the following cases:
a. When the waste fluid tank is more than half full.
b. When "Waste Ink Tank Full" is displayed on the operation panel.
(2) Disposal method
Follow the procedure below to dispose of waste fluid.
• The waste fluid from the printer is industrial waste.
Proper waste fluid disposal according to industrial waste disposal laws and
ordinances of your local government is required.
Consign disposal of waste fluids to a specialized processor.
1. Ready an empty container such as a supply waste fluid bottle, to contain the waste fluid.
2. Lay a protective material on the floor under the waste fluid tank.
3. Open the waste fluid valve, and transfer the waste fluid to the container.
• When pouring the waste fluid to the empty container, the waste fluid may splash, therefore put the
container close to the waste fluid valve.
To Next Page
