VJ-1617H OPERATION MANUAL Troubleshooting
7-3
7.1.2 Cannot print at all
(1) Does not work at all after power activation
(2) Does not work after loading the media
No. Possible cause Remedy Reference
1 Is the power cable connected to the plug? Connect the power cable.
3.1 Power
cable connection
2 Does the AC power supply provide the
specified voltage?
Connect the cable to another outlet.
3.1 Power
cable connection
3 Is the front cover open or media loading lever
raised?
Close the front cover.
Lower the media loading lever.
3.5 Setting
media
4 Is the maintenance cover open? Close the maintenance cover.
2.2 Names of
parts and
functions
No. Possible cause Remedy Reference
1 Is Front cover open, or Front media loading
lever raised (Rear media loading lever
lowered)?
Close Front cover, and lower Front media
loading lever (raise Rear media loading
lever).
3.5 Setting
media
2 Is the maintenance cover open? Close the maintenance cover.
2.2 Names of
parts and
functions
3 Is the media loaded at an angle? Load the media straight.
3.5 Setting
media
4 Are S/C cards and Ink packs inserted into
High-capacity pack adapters?
Insert S/C cards and Ink packs.
Operation
manual for High-
Capacity Ink Pack
Adapter "3.1
Installing High-
Capacity Ink Pack
Adapter"
5 Are High-capacity pack adapters inserted into
the printer?
Insert High-capacity pack adapters.
6 Are you using the recommended media? Use the recommended media.
4.2.1 Loadab
le media
7 Is the printer being used in an environment
other than the one specified, such as in direct
sunlight?
Only use the printer in an environment that is
specified for use.
Installation
manual
To Next Page
Loading...
Need help?
General