•The value of the Authorization Code may be displayed for the display of the option function.
• For details, contact your local MUTOH dealer.
7.2.2 Error message display and remedies
This section describes error messages and remedies.
Error messages are displayed when certain failures occur during printer operation.
If an error that can be displayed occurs, the printer may display the following error messages on the
operation panel and stop operation.
If the printer stops operating, solve the error so that the printer restarts.
62 Detaching instrument
[ENTER]
Measurement completed.
Press [ENTER].
4.6 Using
Spectrophotomet
er
(SPECTROVUE
VM-10)
63 Open left mainte. cover. Open Maintenance Cover on the left side of
the printer.
4.6 Using
Spectrophotomet
er
(SPECTROVUE
VM-10)
64 Detach instrument and set connector cap.
[ENTER]
Remove Spectrophotometer (SPECTROVUE
VM-10) and install Connector Cap.
4.6 Using
Spectrophotomet
er
(SPECTROVUE
VM-10)
65 Remove white plate then close left
maintenance cover.
Turn over White Reference Plate to install and
close Maintenance Cover.
4.6 Using
Spectrophotomet
er
(SPECTROVUE
VM-10)
66 Retry attaching instrument.
[ENTER]
Spectrophotometer (SPECTROVUE VM-10)
is not installed correctly. Install it again.
4.6 Using
Spectrophotomet
er
(SPECTROVUE
VM-10)
No. Display Description Remedy Reference
1 Undefined Media Failed in identifying the
media.
(Stops operation)
Reload the media.
3.5 Setting
media
No. Display Description Reference