To Next Page

To Previous Page

Handling the printer VJ-1617H OPERATION MANUAL

4-4

4.2 Media

This section explains details of available media for this printer.

4.2.1 Loadable media

You can load the following rigid media *1 on this printer:

• Maximum width: 1,625 mm

• Minimum width: 182 mm

• Maximum depth: 1,200 mm

• Minimum depth: 200 mm

• Thickness: 15 mm or less (including media warpage and unevenness)

• Weight: 15 kg or less

• Media warpage: Less than 1 mm. (when the media thickness is uneven, make sure that the total of

the warpage and unevenness is less than 1 mm. Also, do not print with the warpage facing up.)

*1: Hard media such as a board is described as "rigid media" in this manual.

You can load the following roll media on this printer:

• 2 inch/3 inch tube roll media

• Diameter: 150 mm or less

• Maximum width: 1,625 mm

• Minimum width: 182 mm

• Weight: 66.14lb or less

• Make sure that the media does not warp on the platen due to curls.

4.2.2 Recommended media

Various recommended media are prepared for this printer.

Select the appropriate media according to the usage.

MUTOH vj-1617h User Manual

Other manuals for MUTOH vj-1617h