Panel setup menu VJ-1617H OPERATION MANUAL
5-38
5.3.11 Roll Length menu
Select the setting for the roll media length you are using.
5.3.11.1 Roll media length menu
Sets up the roll media length.
• When replacing the roll media, adjust the roll media length again.
If the roll media length is not set, the residual quantity of roll media is not displayed correctly.
Setup item Setting Description
Roll media <Off> Roll Length is not used.
• [Enter] key: saves the setting and shifts to the previous
menu.
5.3 Setup menu
Roll 1 Sets up the roll media length.
The Roll Length setting is set for three types as "Roll 1" to
"Roll 3".
• [Enter] key: saves the setting and shifts to the sub menu.
5.3.11.1 Roll media length menu
Roll 2
Roll 3
— • [Cancel] key: cancels the setting and shifts to the previous
menu.
5.3 Setup menu
Setup item Setting Description
Length 1 m to <30 m> to 99 m Set the roll media length.
— • [Enter] key: saves the setting and shifts to the previous
menu.
• [Cancel] key: cancels the setting and shifts to the previous
menu.
5.3.11.1 Roll media length menu
To Next Page
Loading...
Need help?
General