VJ-1617H OPERATION MANUAL Panel setup menu
5-49
5.7.1 Longstore menu
Performs head washing using cleaning fluid.
Setup item Setting Description
Longstore Start • [Enter] key: Performs head cleaning..
Remove Cartridges • Remove all High-capacity pack adapters.
After removing High-capacity pack adapters, wipe off the
ink attached to them.
“3.2 When High-Capacity Ink Pack Adapter is removed
from Printe” of High-Capacity Ink Pack Adapter
OPERATION MANUAL.
Empty WasteInk ->E Check Waste fluid tank, and remove any waste fluid from the
tank.
• [Enter] key: shifts to the next procedure.
Insert cleaning cart. Install the cleaning cartridges to High-capacity pack adapters,
and then insert them into the printer.
“3.1 Installing Ink Packs” of High-Capacity Ink Pack
Adapter OPERATION MANUAL.
Busy-Washing The printer fills the cleaning fluid.
Remove Cartridges Remove all High-capacity pack adapters.
Discharging ink Discharging the cleaning liquid from Print head.
• When the first discharging finishes, "Insert CleaningCart"
is displayed; repeat the cleaning procedure.
• Once the second discharging is finished, cleaning is
complete.
[ALL] No cartridges Cleaning is complete.
— • [Cancel] key: shifts to the previous menu without Head
washing.
To Next Page
Loading...
Need help?
General