Panel setup menu VJ-1617H OPERATION MANUAL
5-24
5.3.1.1 Spitting Pass Count menu
Set the intervals that Print head returns to Spitting boxes when "On" or "On Media" is set in Spitting
menu. Print head returns to Spitting box every shuttle per the set number.
• If the number of spitting returns is set high, the spitting operation is not done on Spitting box.
Therefore there is a higher chance of nozzle clogging when printing for a long time. In such a case,
print quality cannot be guaranteed.
Setup item Setting Description
Spitting <On> Every time Print head moves back and forth for the set number
of times, Print head performs the spitting operation at Spitting
box. Set the number of shuttles in "
5.3.1.1 Spitting Pass
Count menu
".
• [Enter] key: saves the setting and shifts to the sub menu.
5.3.1.1 Spitting Pass Count menu
On Media Perform the spitting operation on the page margins.
The printing speed will be improved since the number of time
to return to Spitting box is reduced.
• [Enter] key: saves the setting and shifts to the sub menu.
5.3.1.1 Spitting Pass Count menu
Off Spitting operation is not performed.
• [Enter] key: saves the setting and shifts to the previous
menu.
5.3 Setup menu
— • [Cancel] key: cancels the setting and shifts to the previous
menu.
5.3 Setup menu
Setup item Setting Description
ReturnCount <1 time> to 999 times Set the spitting return count.
— • [Enter] key: saves the setting and shifts to the previous
menu.
• [Cancel] key: cancels the setting and shifts to the previous
menu.
5.3.1 Spitting menu
To Next Page
Loading...
Need help?
General