Maintenance VJ-1617H OPERATION MANUAL
6-56
6.7 Moving or transporting the printer
This section describes how to move or tranport the printer.
6.7.1 Moving the printer
This sub-section describes how to move the printer.
• Move the printer maintaining a horizontal position.
• Do not slant the printer, prop it against a wall or turn it upside down.
There is a possibility that ink inside the printer may leak.
Moreover, normal operation after shifting (to these positions) cannot be guaranteed.
(1) Preparation before moving
Follow the procedure below to move the printer.
1. Performs head cleaning using the cleaning liquid.
3.2.2 Turning the power OFF
2. Confirm that the printer is OFF.
3.2.2 Turning the power OFF
3. Dispose of waste fluid.
6.6 Disposal the waste fluids
4. When Media-feed table (optional) is installed, remove it from the printer.
3.5.3 Removing Media-feed table (optional)
5. Remove all the cables, such as the power cable.
6. Loosen the four adjusters of the stand as shown in the next illustration.
7. Move the printer.
• The casters supplied with the dedicated stand are manufactured for little movement in flat indoor
areas, not for transporting equipment.
To Next Page
Loading...
Need help?
General