The power of Blower heater may not be turned off soon because of the cooling operation
4.5.3 Interlocking/Not interlocking the printer and Blower heater
You can select whether or not to interlock Blower heater with the printer with Link switch by swtiching
ON/OFF Link swtitch.
• When you want to use Blower heater along with the printer operation, set it to interlock.
• Do not interlock the operations if you want to start Blower heater separately from the printer.
(1) When interlocking with the printer
1. Turn Link switch of Blower heater to "Printer Link".
• When using this printer under Printer Link, you can use the heater more efficiently by setting the
standby heating.
5.3.6 Standby Heating menu
No. Name
1Power switch
No. Name
1 Link switch