VJ-1617H OPERATION MANUAL Before using
3-21
3.4 Initial ink filling
Head cleaning and the initial ink filling are required before you use this printer.
• High-capacity ink pack adapter is used to install ink packs on this printer.
• This operation takes about 43 minutes. (Not including the time for removing or installing the High-
capacity ink pack adapter.)
Outline of the procedure is as follows.
Make sure that you also read "
3.4.1 Details of initial ink filling".
1. On Operation panel, select the number of ink you want to use.
2. Set a cleaning fluid pack to High-capacity pack adapter, and then install it to the printer.
• The printer fills the cleaning fluid.
3. Remove High-capacity ink pack adapter from the printer.
No. Name
1 High-capacity pack adapter
2 Ink cartridge slots
To Next Page
Loading...
Need help?
General