VJ-1617H OPERATION MANUAL Before using
3-15
3.3 Sleep mode
If you set the printer's sleep mode, the printer performs the following operation.
• Vacuum fan stops.
• Blower heater stops (Link mode only)
• All Lamps turn off except for Power lamp.
• Automatic head cleaning is performed after the time set in the Timer Setting Menu has elapsed.
5.1.1 Timer Setting menu
• Some of the ink inside the printer is circulated (every 24 hours).
• Refills a small amount of ink (once every week: only when 5 colors are used).
Because this minimizes the operation, you can reduce power consumption.
•The cleaning mode reflects the settings in Operation panel.
6.5.3 Head cleaning
•It may take some time for Blower heater to stop because it has to cool down.
•Stop Blower heater manually in Manual mode.
• You need to let the ink flow inside the printer regularly, therefore, do not turn OFF
the printer after regular operation; make sure you use the sleep mode.
• If you expect keeping the sleep mode for a long time, first follow the procedure in "6.3.1 Operation
procedure for long storage
".
3.3.1 Set sleep mode on the printer
1. Make sure that the printer's operating condition is as follows:
• Printing or other operation is not in progress.
• Operation panel display is in the Normal condition.
• There is ample amount of ink in the ink packs.
5.3.15 Ink Status menu
6.4.1 Replacing ink bags
• There is enough free space in the waste fluid bottle.
6.6 Disposal the waste fluids
• Front cover is closed.
To Next Page
Loading...
Need help?
General