Before using VJ-1617H OPERATION MANUAL
3-16
• Media loading lever is lowered (Media loading lever on the rear side is raised).
• Front media loading lever is lowered (Rear media loading lever is raised).
2. Press the [Menu] key on Operation panel.
• "Menu1: Sleep Mode" is displayed on Operation panel.
3. Press the [>] key on Operation panel.
• "Sleep Mode1: Timer Set" is displayed on Operation panel.
• Set the head cleaning interval while the printer is in Sleep Mode.If it has already been set, proceed
to step 7.
4. Press the [Enter] key on Operation panel.
To Next Page
Loading...
Need help?
General