•Refer to the following for the operation procedure of test print.
5.4 TestPrint Menu
Setup item Description
Nozzle check Perform the nozzle check printing.
It is used to check whether there are any clogged heads, or missing or blurred prints.
3.6.1 Nozzle check
Nozzle check B Performs nozzle check printing for white ink.
3.6.2 Nozzle check B
Mode print Mode print can be performed.
Used to confirm the following printing conditions.
• Print quality
•Effect
• Adjustment value
3.6.2 Nozzle check B
Setup List Setup list printing is performed.
Use it for checking the setup item of the printer.
3.6.4 Setup printt
Palette Palette printing is performed.
It is used to compare pen colors of the computer the colors printed by this printer.
3.6.5 Palette print
Color Verify Print the color patches, then measure the color using the optional spectrophotometer
(SPECTROVUE VM-10). Compare the currently printed color with the previously printed
color to check the color difference.
3.6.6 Color verify
— • [Enter] key:
"Printing" is displayed on the operation panel and test printing starts.
• [Cancel] key: shifts to the previous menu.
5 Panel setup menu
To Next Page
Loading...
Need help?
General