Before using VJ-1617H OPERATION MANUAL
3-122
3.8 Connecting the printer to PC
This section explains how to connect the printer and a PC.
3.8.1 System requirements
The operating systems with which this printer is compatible are as follows.
• The required memory varies depending on the application software or the print data type.
• A large hard disk and memory are recommended.
• For the system requirements for the operation of the software server RIP (option), refer to the
operation manual of the software server RIP.
3.8.2 Preparing cables
The printer is equipped with a network interface for connecting with a PC.
You need a network interface cable to connect a PC with this printer.
Prepare the cable depending on the PC that it will be connected to.
•About connecting a network interface cable, refer to "3.8.3 Connecting a network interface cable".
•For the recommended cable specifications, refer to "
8.2 Interface specification".
3.8.3 Connecting a network interface cable
This section explains how to connect a network interface cable.
Follow the procedure below to connect this printer to your PC.
1. Turn OFF both the printer and PC.
2. Insert the connector of the network interface cable into the network interface connector located in
the back of the printer.
Operating system Windows 7, Windows Vista, Windows XP