VJ-1617H OPERATION MANUAL Maintenance
6-57
(2) Reinstalling
After moving the printer, follow the procedure below to set it ready for use.
1. Select a suitable place for installation.
Installation manual
2. Move and install the printer to the location.
3. Attach cables, such as the power cable.
3.1 Power cable connection
3.7 Adjust print
4. Perform the intial ink charge.
Steps 7 and after of
6.3.2.1 Recovery procedure for the printer after long storage (when the
printer was turned OFF)
5. Perform Nozzle check, and then confirm that there is no clogging in the print head.
3.6.1 Nozzle check
6. Perform Alignment.
3.7 Adjust print
No. Name
1 Adjusters
2 Stands
To Next Page
Loading...
Need help?
General