Before using VJ-1617H OPERATION MANUAL
3-102
• For the rough adjustment pattern, the same petterns will be printed on both sides and center of
the media.
• “PatternB: 6” is displayed on Operation panel.
4. Check the print results on both sides and center of the media and select the number that looks most
aligned between 1 and 11.
“7” is selected in the next printing sample.
• “6” represents the current setting value.
5. Press the [+] key or [–] key to enter the number that you selected in Step 4.
To Next Page
Loading...
Need help?
General