Handling the printer VJ-1617H OPERATION MANUAL
4-14
• The operation panel shifts to the Setup menu display.
b. Press the [+] or [-] key oon the operation panel to select "Menu3: Setup".
c. Press the [>] key oon the operation panel.
• "Set1: MediaType" is displayed on the operation panel.
d. Press the [+] key or [–] key to select "Set2: Side Margin".
e. Press the [Enter] key on the operation panel.
• "Side Margin: ** mm" is displayed on the operation panel.
• The display shifts to the Side Margin menu.
5.3.2 Side Margin menu
• The current setting value is displayed in the "**" of the Side Margin menu.
2. Set up the margins (side margins) to more than 6 mm during printing.
a. Press the [+] key or [-] key on Operation panel to set the side margins to more than 6 mm.
b. Press the [Enter] key on the operation panel.
• After having saved the setting, "Set2: Side Margin" is displayed on the operation panel.
c. Press the [Cancel] key on the operation panel several times.
• The operation panel returns to Normal.
3. Used to load the roll media.
3.5.5 Setting roll media
4. Set the media holder plates by sliding them from both sides of the platen.
• Do not use the media holder plates for media whose thickness is 500 m (0.5 mm) or thicker.
The media holder plate may interfere with the print head.
To Next Page
Loading...
Need help?
General