NETGEAR ProSAFE WC7500 User Manual

Configure the System and Network Settings and Register the Licenses
100
ProSAFE Wireless Controller
Configure the General Settings
Note: You must select the correct country or region of operation. It might not
be legal to operate the access points in a country or region not shown
here. If your location is not listed, check with your local government
agency or check the NETGEAR website for more information about
which channels to use.
The General Settings page lets you configure the basic settings of your wireless controller.
 To configure general settings:
1. Open a web browser, and in the browser’s address field, type the wireless controller’s IP
address.
By default, the IP address is 192.168.0.250.
The wireless controller’s login window opens.
2. Enter your user name and password.
3. Click the Login button.
The wireless controller’s web management interface opens and displays the Summary
page.
4. Select Configuration > System > General.

NETGEAR ProSAFE WC7500 Specifications

General

Brand	NETGEAR
Model	ProSAFE WC7500
Category	Controller
Language	English