NETGEAR ProSAFE WC7500 User Manual

Configure WiFi and QoS Settings
213
ProSAFE Wireless Controller
If you do not want to configure rate limiting for a profile, configure rate limiting as
0 (zero) percent. Configuring 0 percent effectively disables rate limiting for that profile.
A setting of 0 percent can work well for profiles that are used for management,
administration, or testing.
Configure Rate Limiting for the Basic Profile Group
In the basic profile group, for each radio mode (802.11b/bg/ng mode and 802.11a/na/ac
mode), rate limiting per profile adds up to a maximum of 100 percent. (It can be less than
100 percent.)
 To configure rate limiting for the basic profile group:
1. Open a web browser, and in the browser’s address field, type the wireless controller’s IP
address.
By default, the IP address is 192.168.0.250.
The wireless controller’s login window opens.
2. Enter your user name and password.
3. Click the Login button.
The wireless controller’s web management interface opens and displays the Summary
page.
4. Select Configuration > Profile > Basic > Rate Limit.
The page provides a tab for each WiFi radio.
5. Click the tab for the radio for which you want to configure rate limiting.
6. For each profile on a WiFi radio, specify the rate limit as a percentage.
You can drag the sliders to adjust the values in the Rate Limit fields to the right of the
sliders. Make sure that the total percentages of all profiles on one WiFi radio do not
exceed 100 percent.

NETGEAR ProSAFE WC7500 Specifications

General

Brand	NETGEAR
Model	ProSAFE WC7500
Category	Controller
Language	English