NETGEAR ProSAFE WC7500 User Manual

Configure the System and Network Settings and Register the Licenses
104
ProSAFE Wireless Controller
Configure the IP, VLAN, and Controller Link Aggregation
Settings
Note: Link aggregation is not supported on model WC7500 and model
WC7600v2.
You can configure the management IP address, VLAN settings, and link aggregation (LAG)
settings of the wireless controller.
 To configure IP, VLAN, and controller LAG settings:
1. Open a web browser, and in the browser’s address field, type the wireless controller’s IP
address.
By default, the IP address is 192.168.0.250.
The wireless controller’s login window opens.
2. Enter your user name and password.
3. Click the Login button.
The wireless controller’s web management interface opens and displays the Summary
page.
4. Select Configuration > System > IP/VLAN.
5. Configure the settings as described in the following table.

NETGEAR ProSAFE WC7500 Specifications

General

Brand	NETGEAR
Model	ProSAFE WC7500
Category	Controller
Language	English