Manage Security Profiles and Profile Groups
129
ProSAFE Wireless Controller
For information about how to change the settings, see Configure a Profile in the Basic
Profile Group on page 124.
8. Click the Apply button.
Your settings are saved.
Remove a Profile From the Basic Profile Group
You can remove a profile from the basic profile group.
 To remove an existing profile:
1. Open a web browser, and in the browser’s address field, type the wireless controller’s IP
address.
By default, the IP address is 192.168.0.250.
The wireless controller’s login window opens.
2. Enter your user name and password.
3. Click the Login button.
The wireless controller’s web management interface opens and displays the Summary
page.
4. Select Configuration > Profile > Basic > Radio.
The Edit Profile (Basic) page displays.
5. Click the tab for the radio for which you want to remove a profile.
6. Click the tab for the profile that you want to remove.
7. Click the Delete button.
8. Confirm that you want to remove the profile.
Manage Security Profiles for Advanced Profile Groups
Advanced profile groups are useful for larger deployments. We recommend that you read the
information in the WiFi Security Profile Concepts on page 121 before you configure any
profile groups and profiles.
Add an Advanced Profile Group
The advanced Profile Group page lets you create up to eight profile groups. For each profile
group, you can create and configure up to eight security profiles per WiFi radio (eight profiles
for a single-band access point; 16 profiles for a dual-band access point). Separate profiles
are applied to 802.11b/bg/ng-mode and 802.11a/na/ac-mode radios.
By default, all access points are assigned to the basic profile group. After you create
advanced profile groups, you can use the WLAN Network page to reassign access points to
any of these advanced profile groups (see Assign Access Points to Buildings, Floors, and
Advanced Profile Groups on page 174).
To Next Page
Loading...
Need help?
General
