NETGEAR ProSAFE WC7500 User Manual

Configure WiFi and QoS Settings
214
ProSAFE Wireless Controller
7. Click the Apply button.
Your settings are saved.
Configure Rate Limiting for an Advanced Profile Group
For each advanced profile group, and for each radio mode (802.11b/bg/ng mode and
802.11a/na/ac mode), rate limiting per profile adds up to a maximum of 100 percent. (It can
be less than 100 percent.)
 To configure rate limiting for an advanced profile group:
1. Open a web browser, and in the browser’s address field, type the wireless controller’s IP
address.
By default, the IP address is 192.168.0.250.
The wireless controller’s login window opens.
2. Enter your user name and password.
3. Click the Login button.
The wireless controller’s web management interface opens and displays the Summary
page.
4. Select Configuration > Profile > Advanced > Rate Limit.
The page provides a tab for each group. For each group, the page provides a tab for each
WiFi radio.
5. Click the tab for the profile group for which you want to configure rate limiting.
6. Click the tab for the radio for which you want to configure rate limiting.

NETGEAR ProSAFE WC7500 Specifications

General

Brand	NETGEAR
Model	ProSAFE WC7500
Category	Controller
Language	English