NETGEAR ProSAFE WC7500 User Manual

Configure the System and Network Settings and Register the Licenses
102
ProSAFE Wireless Controller
4. Select Configuration > System > Time.
5. Configure the settings as described in the following table.
6. Click the Apply button.
Your settings are saved.
Manage the IP, VLAN, and Link Aggregation Settings
You can manage the IP address, VLAN settings, and link aggregation (LAG) settings of the
wireless controller.
Management VLAN Concepts
Management VLANs are used for all SNMP and HTTP traffic to and from the wireless
controller and managed access points.
For large deployments, we recommend that the wireless controller and access points are in
separate VLANs to ensure uninterrupted connectivity between the wireless controller and the
access points.
Setting Description
Time Zone From the menu, select the local time zone for your country or region.
Current Time This field is a nonconfigurable field that displays the current time at your
location.
NTP Client Select the Enable radio button to use a Network Time Protocol (NTP) server to
synchronize the clock of the wireless controller and managed access points.
Select the Disable radio button if you do not want to use an NTP server.
Use Custom NTP Server Select the Use Custom NTP Server check box if you want to use an alternate
NTP server. By default, the NETGEAR NTP server is used.
Hostname/IP Address Enter the host name or IP address of the NTP server, if you are using a custom
NTP server.

NETGEAR ProSAFE WC7500 Specifications

General

Brand	NETGEAR
Model	ProSAFE WC7500
Category	Controller
Language	English