NETGEAR ProSAFE WC7500 User Manual

Manage Security Profiles and Profile Groups
131
ProSAFE Wireless Controller
Remove an Advanced Profile Group
You can remove an advanced profile group
 To remove an advanced profile group:
1. Open a web browser, and in the browser’s address field, type the wireless controller’s IP
address.
By default, the IP address is 192.168.0.250.
The wireless controller’s login window opens.
2. Enter your user name and password.
3. Click the Login button.
The wireless controller’s web management interface opens and displays the Summary
page.
4. Select Configuration > Profile > Advanced > Radio.
The Profile Groups page displays.
5. Click the tab for the profile group that you want to remove.
6. Click the Delete button.
Note: A separate procedure to change profile groups does not exist. You
change profile groups by adding, removing, or changing profiles in the
profile group.
Configure a Profile in an Advanced Profile Group
For each profile group, the Edit Profile (Group-X, in which X is the group number) page lets
you create and configure up to 8 security profiles per WiFi radio (8 profiles for a single-band
access point; 16 profiles for a dual-band access point). Separate profiles are applied to
802.11b/bg/ng-mode and 802.11a/na/ac-mode radios.
 To add a security profile to an advanced profile group and configure the security
profile:
1. Open a web browser, and in the browser’s address field, type the wireless controller’s IP
address.
By default, the IP address is 192.168.0.250.
The wireless controller’s login window opens.
2. Enter your user name and password.
3. Click the Login button.
The wireless controller’s web management interface opens and displays the Summary
page.

NETGEAR ProSAFE WC7500 Specifications

General

Brand	NETGEAR
Model	ProSAFE WC7500
Category	Controller
Language	English