Manage Security Profiles and Profile Groups
135
ProSAFE Wireless Controller
11. Click the Apply button.
Your settings are saved.
Change the Settings for a Profile in an Advanced Profile Group
You can change the settings for a profile in an advanced profile group.
 To change the settings for an existing profile to an advanced profile group:
1. Open a web browser, and in the browser’s address field, type the wireless controller’s IP
address.
By default, the IP address is 192.168.0.250.
The wireless controller’s login window opens.
2. Enter your user name and password.
3. Click the Login button.
The wireless controller’s web management interface opens and displays the Summary
page.
4. Select Configuration > Profile > Advanced > Radio.
The Profile Groups page displays.
5. Click the tab for the profile group for which you want to change a profile.
6. Click the Edit button.
The Edit Profile page displays.
Note: The
Authentication Server
buttons and menu display
only when you select WPA
with Radius, WPA2 with
Radius, or WPA & WPA2
with Radius from the
Network Authentication
menu.
Authentication
Server
Select one of the following radio buttons:
• Local. Use the local authentication server.
• External. Use an external authentication server.
Select an external authentication server from the
Authentication Server menu.
Note: For information about setting up and enabling internal
and external authentication servers, see Manage Authentication
Servers and Authentication Server Groups on page 140.
Wireless QoS section
Wi-Fi Multimedia (WMM) To enable Wi-Fi Multimedia (WMM), select the Enable radio button, which is
the default setting.
Select the Disable button to disable the feature. For more information, see
Manage Quality of Service for an Advanced Profile Group on page 207.
WMM Powersave The WMM Powersave feature saves power for battery-powered equipment by
increasing the efficiency and flexibility of data transmission.
To enable this feature, select the Enable radio button, which is the default
setting.
Select the Disable button to disable the feature.
Setting Description
To Next Page
Loading...
Need help?
General
