NETGEAR ProSAFE WC7500 User Manual

Manage Security Profiles and Profile Groups
142
ProSAFE Wireless Controller
Configure Basic Authentication Server Settings
Use the basic Authentication Server page to set up the internal authentication server, the
basic external RADIUS server (which is called Auth-basic), and the external LDAP server
(which is called Auth-LDAP). After you set up these authentication servers, you can assign
any of them to any profile, whether in the basic profile group or in an advanced profile group.
 To configure a basic authentication server:
1. Open a web browser, and in the browser’s address field, type the wireless controller’s IP
address.
By default, the IP address is 192.168.0.250.
The wireless controller’s login window opens.
2. Enter your user name and password.
3. Click the Login button.
The wireless controller’s web management interface opens and displays the Summary
page.
4. Select Configuration > Security > Basic > Authentication Server.
The basic Authentication Server page displays. The following figure shows the fields for
an external LDAP server:
5. Select the radio button that corresponds to the authentication server that you want to set up:
• External RADIUS Server
• Internal Authentication Server
• External LDAP Server
6. Configure the settings that correspond to the selected authentication server as described in
the following table.

NETGEAR ProSAFE WC7500 Specifications

General

Brand	NETGEAR
Model	ProSAFE WC7500
Category	Controller
Language	English