Monitor the WiFi Network and Its Components
357
ProSAFE Wireless Controller
The following table describes the fields of the Client Details pop-up window.
12. Click the OK button.
The Client Details pop-up window closes, and the Local Client List page displays again.
Monitor Blacklisted Clients
You can monitor all clients that were denied access to the network by all wireless controllers in
the network.
Note: Monitoring of blacklisted clients is supported on models WC7600 and
WC9500 but not on models WC7500 and WC7600v2.
Item Description
MAC The MAC address of the WiFi client.
Access Point The name of the access point to which the WiFi client is connected.
BSSID The MAC address of the access point’s radio to which the WiFi client is
connected.
SSID The WiFi network SSID that the WiFi client is using to connect to the access
point.
Frequency The channel frequency that the WiFi client is using to connect to the access
point.
Auth The security mode that the WiFi client is using to connect to the access
point (Open, WEP, WPA, WPA2, or WPA/WPA2).
Client Type The wireless mode that the WiFi client is using to connect to the access
point (802.11ng, 802.11bg, 802.11b, 802.11ac, 802.11na, or 802.11a).
Cipher The type of encryption that the WiFi client is using (None, WEP, AES, TKIP,
or TKIP + AES).
AID The association ID of the client.
RSSI The received signal strength indicator (RSSI) of the WiFi client.
Tx Power The transmit power of the WiFi client.
Tx Rate The transmit rate in Mbps of the WiFi client.
Tx Bytes The number of bytes that the WiFi client transmitted.
Rx Rate The receive rate in Mbps of the WiFi client.
Rx Bytes The number of bytes that the WiFi client received.
Tx packets The number of packets that the WiFi client transmitted.
Rx Packets The number of packets that the WiFi client received.