Configure WiFi and QoS Settings
180
ProSAFE Wireless Controller
2. Enter your user name and password.
3. Click the Login button.
The wireless controller’s web management interface opens and displays the Summary
page.
4. Select Configuration > Wireless > Basic > Radio On/Off.
5. Configure the settings as described in the following table.
6. Click the Apply button.
Your settings are saved.
Configure the Radio for an Advanced Profile Group
You can schedule the radio for specific groups to match their network usage. For example,
during registration, a school could leave the radios on for the main office or administration
building, and turn off radios in buildings that contain only classrooms that are not in use.
Setting Description
Current Time This field is a nonconfigurable field that displays the current time for the wireless
controller.
Schedule Radio On/Off You can specify either when the radio is on by selecting the On radio button or
when it is off by selecting the Off radio button.
Schedule at From the menus, specify the time (hours and minutes) when you want to turn the
radio either on or off.
Schedule On Select the check boxes for each day of the week that you want to schedule the
radio to be either on or off.
Duration From the menus, select the duration (in hours and minutes) that the radio must
be either on or off.
To Next Page
Loading...
Need help?
General
