NETGEAR ProSAFE WC7500 User Manual

Maintain the Wireless Controller and Access Points
273
ProSAFE Wireless Controller
View Stacking Events
The wireless controller generates alerts for stacking events such as a slave wireless
controller coming up or going down, or two wireless controllers synchronizing.
 To view stacking events:
1. Open a web browser, and in the browser’s address field, type the wireless controller’s IP
address.
By default, the IP address is 192.168.0.250.
The wireless controller’s login window opens.
2. Enter your user name and password.
3. Click the Login button.
The wireless controller’s web management interface opens and displays the Summary
page.
4. Select Maintenance > Logs & Alerts > Stacking.
5. If the table contains many entries, navigate through the table by using the following buttons
and menu that display at the bottom of the table:
• To move to the next page, click the Next button.
• To move to the previous page, click the Previous button.
• To change the number of entries onscreen, from the Entry Per Page menu, select
20, or 40, or 60, and so on, or All.
6. To display the latest events onscreen, click the REFRESH button.
7. To save the events to your computer, click the EXPORT button and follow the directions of
your browser.
8. To clear all events from the page and from memory, click the CLEAR ALL button.
We recommend that you save the events before you clear them.

NETGEAR ProSAFE WC7500 Specifications

General

Brand	NETGEAR
Model	ProSAFE WC7500
Category	Controller
Language	English