NETGEAR ProSAFE WC7500 User Manual

Monitor the WiFi Network and Its Components
346
ProSAFE Wireless Controller
The table shows the user email addresses and the date and time that the user logged in.
5. To sort the table, click the double triangle icon or single triangle icon at the top right of a
column.
6. To search the table, in the Search field, enter the information that you are looking for, such
as an IP address or MAC address.
7. If the table contains many entries, navigate through the table by using the following buttons
and menu that display at the bottom of the table:
• To move to the next page, click the Next button.
• To move to the previous page, click the Previous button.
• To change the number of entries onscreen, from the Entry Per Page menu, select
20, or 40, or 60, and so on, or All.
8. To display the latest information onscreen, click the REFRESH button.
9. To clear all information from the page and from memory, click the CLEAR ALL button.
We recommend that you save the information before you clear the information.
10. To export the table, do the following:
a. Click the EXPORT button.
b. To save the file, follow the directions of your browser.
View AirQual for the Channels in a Profile Group
If you enabled AirQual for a profile group (see Manage AirQual for a Profile Group on
page 203), you can monitor the WiFi channel utilization and interference for a profile group.
 To view the WiFi channel utilization and interference for a profile group for which
AirQual is enabled or to clear the WiFi channel utilization and interference information:
1. Open a web browser, and in the browser’s address field, type the wireless controller’s IP
address.
By default, the IP address is 192.168.0.250.

NETGEAR ProSAFE WC7500 Specifications

General

Brand	NETGEAR
Model	ProSAFE WC7500
Category	Controller
Language	English