NETGEAR ProSAFE WC7500 User Manual

Manage Stacking and Redundancy
287
ProSAFE Wireless Controller
Remove a Wireless Controller From a Stack
You can remove a wireless controller from a stack.
 To remove a wireless controller from a stack:
1. Open a web browser, and in the browser’s address field, type the wireless controller’s IP
address.
By default, the IP address is 192.168.0.250.
The wireless controller’s login window opens.
2. Enter your user name and password.
3. Click the Login button.
The wireless controller’s web management interface opens and displays the Summary
page.
4. Select Stacking.
5. In the Stacking table, select the radio button for the slave controller that you want to remove.
Note: You cannot remove the master controller.
6. Click the Delete button.
The slave controller is removed from the stack.
7. Click the Apply button.
Your settings are saved. The master controller and former slave controllers reboot.
Depending on the number of controllers in the stack, the stack is either decreased in size
and now consists of two instead of thee controllers, or removed entirely.

NETGEAR ProSAFE WC7500 Specifications

General

Brand	NETGEAR
Model	ProSAFE WC7500
Category	Controller
Language	English