NETGEAR ProSAFE WC7500 User Manual

Manage Security Profiles and Profile Groups
124
ProSAFE Wireless Controller
• Advanced security settings. You can apply the following security settings to any profile,
whether in the basic profile group or in an advanced profile group:
- Advanced MAC authentication (the MAC ACLs that are, by default, called Acl-1,
Acl-2, Acl-3, and so on; you can change these default names)
- Advanced authentication server (the RADIUS servers that are, by default, called
Auth-1, Auth-2, Auth-3, and so on; you can change these default names)
Manage Security Profiles for the Basic Profile Group
The basic profile group works well for small-scale WLAN networks. We recommend that you
read the information in the previous section, WiFi Security Profile Concepts, before you
configure any profiles.
Configure a Profile in the Basic Profile Group
The Edit Profile (Basic) page lets you create and configure up to eight security profiles per
WiFi radio (8 profiles for a single-band access point; 16 profiles for a dual-band access point).
Separate profiles are applied to 802.11b/bg/ng-mode and 802.11a/na/ac-mode radios.
 To add a security profile to the basic profile group and configure the security profile:
1. Open a web browser, and in the browser’s address field, type the wireless controller’s IP
address.
By default, the IP address is 192.168.0.250.
The wireless controller’s login window opens.
2. Enter your user name and password.
3. Click the Login button.
The wireless controller’s web management interface opens and displays the Summary
page.
4. Select Configuration > Profile > Basic > Radio.

NETGEAR ProSAFE WC7500 Specifications

General

Brand	NETGEAR
Model	ProSAFE WC7500
Category	Controller
Language	English