NETGEAR ProSAFE WC7500 User Manual

RF Planning and Deployment
69
ProSAFE Wireless Controller
The wireless controller’s login window opens.
2. Enter your user name and password.
3. Click the Login button.
The wireless controller’s web management interface opens and displays the Summary
page.
4. Select Plans > Layout.
The page displays the Planning icons.
5. In the building tree on the left, click the + icon of the building that contains the floor.
The floor names display.
6. Click the floor name.
The floor map displays.
7. Click the Duplicate icon.
A pop-up window opens.
8. Specify a name for the floor and select a building:
a. Enter a name for the new floor.
b. From the Workspace tree, select the building to which you want to add the new floor.
c. Click the Confirm button.
The new floor is added to the building.
Remove a Single Floor
You can remove a single floor from a building. However, you cannot remove the default floor
of the default building.
 To remove a single floor:
1. Open a web browser, and in the browser’s address field, type the wireless controller’s IP
address.
By default, the IP address is 192.168.0.250.
The wireless controller’s login window opens.
2. Enter your user name and password.
3. Click the Login button.
The wireless controller’s web management interface opens and displays the Summary
page.
4. Select Plans > Layout.
The page displays the Planning icons.
5. In the building tree on the left, click the + icon of the building that contains the floor.

NETGEAR ProSAFE WC7500 Specifications

General

Brand	NETGEAR
Model	ProSAFE WC7500
Category	Controller
Language	English