NETGEAR ProSAFE WC7500 User Manual

Configure the System and Network Settings and Register the Licenses
110
ProSAFE Wireless Controller
Register Your Licenses
Make sure that your licenses cover the number of access points in your network. Before you
can register your licenses, you must configure the license server settings.
Note: When you install your licenses, they replace the default trial license.
For more information about licenses, see Licenses on page 17 and Manage Licenses on
page 274.
Configure the License Server Settings
Although you generally do not need to change the default license update server, you must
make sure that the wireless controller can reach the license update server.
 To configure the license server settings:
1. Open a web browser, and in the browser’s address field, type the wireless controller’s IP
address.
By default, the IP address is 192.168.0.250.
The wireless controller’s login window opens.
2. Enter your user name and password.
3. Click the Login button.
The wireless controller’s web management interface opens and displays the Summary
page.
4. Select Maintenance > Licensing.
5. Click the Server Settings tab.

NETGEAR ProSAFE WC7500 Specifications

General

Brand	NETGEAR
Model	ProSAFE WC7500
Category	Controller
Language	English