NETGEAR ProSAFE WC7500 User Manual

Configure WiFi and QoS Settings
208
ProSAFE Wireless Controller
Configure Quality of Service for a Profile Group
You can configure Quality of Service (QoS) settings for each advanced profile group.
 To configure the QoS settings for a profile group:
1. Open a web browser, and in the browser’s address field, type the wireless controller’s IP
address.
By default, the IP address is 192.168.0.250.
The wireless controller’s login window opens.
2. Enter your user name and password.
3. Click the Login button.
The wireless controller’s web management interface opens and displays the Summary
page.
4. Select Configuration > Wireless > Advanced > QoS.
5. Click the tab for the profile group for which you want to configure the QoS settings.
6. Click the tab for the radio for which you want to configure the QoS settings.
7. Configure the settings as described in the following table.

NETGEAR ProSAFE WC7500 Specifications

General

Brand	NETGEAR
Model	ProSAFE WC7500
Category	Controller
Language	English