NETGEAR ProSAFE WC7500 User Manual

RF Planning and Deployment
68
ProSAFE Wireless Controller
7. Change the name.
8. Click the Confirm button.
Your settings are saved.
Duplicate an Entire Building With All Floors
You can duplicate an entire building with all floors and floor plans, including all floor
definitions. For information about duplicating a single floor in a building, see Duplicate a
Single Floor on page 68.
 To duplicate an entire building with all floors:
1. Open a web browser, and in the browser’s address field, type the wireless controller’s IP
address.
By default, the IP address is 192.168.0.250.
The wireless controller’s login window opens.
2. Enter your user name and password.
3. Click the Login button.
The wireless controller’s web management interface opens and displays the Summary
page.
4. Select Plans > Layout.
The page displays the Planning icons.
5. In the building tree on the left, click the building name.
6. Click the Duplicate icon.
A pop-up window opens.
7. Enter a name for the new building.
8. Click the Confirm button.
The new building and floor or floors are added in the building tree.
Duplicate a Single Floor
You can duplicate a single floor and floor plan, including the floor definition. For information
about duplicating an entire building with all floors, see Duplicate an Entire Building With All
Floors on page 68.
 To duplicate a single floor:
1. Open a web browser, and in the browser’s address field, type the wireless controller’s IP
address.
By default, the IP address is 192.168.0.250.

NETGEAR ProSAFE WC7500 Specifications

General

Brand	NETGEAR
Model	ProSAFE WC7500
Category	Controller
Language	English