NETGEAR ProSAFE WC7500 User Manual

Configure the System and Network Settings and Register the Licenses
119
ProSAFE Wireless Controller
Configure the Email Notification Server
The email notification server is the location from which the email alerts originate.
 To configure email settings:
1. Open a web browser, and in the browser’s address field, type the wireless controller’s IP
address.
By default, the IP address is 192.168.0.250.
The wireless controller’s login window opens.
2. Enter your user name and password.
3. Click the Login button.
The wireless controller’s web management interface opens and displays the Summary
page.
4. Select Configuration > System > Alerts/Logs > Email Setup.
5. Configure the settings as described in the following table.
6. Click the Apply button.
Your settings are saved.
Setting Description
Server Address Enter the IP address of the server from which email notifications are sent.
Port Enter the port number of the server from which email notifications are sent. The
default port is 25.
Sender Email Address Enter the email address from which email notifications are sent.
Authentication Required Select the Authentication Required check box if the email server requires
authentication, and complete the User Name and Password fields.
User Name Enter the user name that is associated with the email server.
Password Enter the password that is associated with the email server.

NETGEAR ProSAFE WC7500 Specifications

General

Brand	NETGEAR
Model	ProSAFE WC7500
Category	Controller
Language	English