NETGEAR ProSAFE WC7500 User Manual

RF Planning and Deployment
62
ProSAFE Wireless Controller
12. To add another zone, repeat Step 7 though Step 11.
Remove a WiFi Coverage or Noncoverage Zone From a Floor
After you add and save a WiFi coverage or noncoverage zone on a floor, you can remove it
from the floor.
 To remove a WiFi coverage area or WiFi noncoverage zone from a floor:
1. Open a web browser, and in the browser’s address field, type the wireless controller’s IP
address.
By default, the IP address is 192.168.0.250.
The wireless controller’s login window opens.
2. Enter your user name and password.
3. Click the Login button.
The wireless controller’s web management interface opens and displays the Summary
page.
4. Select Plans > Planning.
The page displays the Planning icons.
5. In the building tree on the left, click the + icon of the building that contains the floor.
The floor names display.
6. Click the floor name.
The floor map displays.
7. Click the Zone icon.
8. Click the zone on the map.
9. Click the Delete link.
10. Click the Save icon.
Your settings are saved.
11. To remove another zone, repeat Step 7 though Step 10.
Add a WiFi Building Obstacle to a Floor
WiFi building obstacles can be any of the following predefined obstacles with their predefined
attenuation factor (WiFi signal loss) in dB or a custom defined building obstacle:
• Dry wall (4 dB)
• Wood wall (4 dB)
• Plastic wall (4 dB)
• Glass wall (8 dB)
• Brick wall (8 dB)

NETGEAR ProSAFE WC7500 Specifications

General

Brand	NETGEAR
Model	ProSAFE WC7500
Category	Controller
Language	English