NETGEAR ProSAFE WC7500 User Manual

RF Planning and Deployment
63
ProSAFE Wireless Controller
• Concrete wall (12 dB)
• Light door (4 dB)
• Metal door (11 dB)
• Heavy door (15 dB)
• Thin window (2 dB)
• Thick window 4 dB)
These obstacles contribute to the WLAN signal degradation based on their construction
materials and interferences.
Note: Before you add a building obstacle, first define the floor dimensions (see
Add a Single Floor to a Building on page 59) or scale the floor (see Scale
a Floor on page 60).
 To add a WiFi building obstacle to a floor:
1. Open a web browser, and in the browser’s address field, type the wireless controller’s IP
address.
By default, the IP address is 192.168.0.250.
The wireless controller’s login window opens.
2. Enter your user name and password.
3. Click the Login button.
The wireless controller’s web management interface opens and displays the Summary
page.
4. Select Plans > Planning.
The page displays the Planning icons.
5. In the building tree on the left, click the + icon of the building that contains the floor.
The floor names display.
6. Click the floor name.
The floor map displays.
7. Click the Obstacle icon.
8. Take one of the following actions:
• Select the icon for one of the predefined obstacles.
• Define a custom obstacle:
a. Click the Add Obstacle Type link.
The Add New Obstacle Type pop-up window opens.
b. Enter a name.
c. Enter the attenuation factor in dB.
d. Select a color.
e. Click the Confirm button.

NETGEAR ProSAFE WC7500 Specifications

General

Brand	NETGEAR
Model	ProSAFE WC7500
Category	Controller
Language	English