NETGEAR ProSAFE WC7500 User Manual

Configure WiFi and QoS Settings
205
ProSAFE Wireless Controller
Dedicated mode means that the WAC740 access point is dedicated to AirQual monitoring
and does not accept WiFi client associations.
8. Click the Apply button.
Your settings are saved.
For information about monitoring AirQual, see View AirQual for the Channels in a Profile
Group on page 346.
Configure AirQual for an Advanced Profile Group
You can configure AirQual for an advanced profile group. One WAC740 access point can
monitor the WiFi channel utilization and interference for the entire advanced profile group
that you select.
 To configure AirQual for an advanced profile group:
1. Open a web browser, and in the browser’s address field, type the wireless controller’s IP
address.
By default, the IP address is 192.168.0.250.
The wireless controller’s login window opens.
2. Enter your user name and password.
3. Click the Login button.
The wireless controller’s web management interface opens and displays the Summary
page.
4. Select Configuration > Wireless > Advanced > AirQual.
5. Click the tab for the profile group for which you want to configure AirQual.

NETGEAR ProSAFE WC7500 Specifications

General

Brand	NETGEAR
Model	ProSAFE WC7500
Category	Controller
Language	English