NETGEAR ProSAFE WC7500 User Manual

Hardware Descriptions
30
ProSAFE Wireless Controller
• WNDAP350 ProSAFE Dual Band Wireless-N Access Point
- Supports 802.11a, 802.11b, 802.11g, and 802.11n network devices.
- Operates concurrently in the 2.4 GHz and 5 GHz radio bands.
- Supports Power over Ethernet (PoE) with a power consumption of up to 10.75W.
- Accepts optional antennas.
For product documentation and firmware, visit netgear.com/support/product/WNDAP350.
• WNAP320 ProSAFE Wireless-N Access Point
- Supports 802.11b, 802.11g, and 802.11n network devices.
- Operates in the 2.4 GHz radio band.
- Supports Power over Ethernet (PoE) with a power consumption of up to 5.8W.
- Accepts optional antennas.
For product documentation and firmware, visit netgear.com/support/product/WNAP320.
• WNAP210v2 ProSAFE Wireless-N Access Point
- Supports 802.11b, 802.11g, and 802.11n network devices.
- Operates in the 2.4 GHz radio band.
- Supports Power over Ethernet (PoE) with a power consumption of up to 5.8W.
- Operates in the 2.4 GHz radio band.
For product documentation and firmware, visit
netgear.com/support/product/WNAP210v2.
Note: Model WNAP210v1 cannot function in a wireless controller system, but
model WNAP210v2 can.
Supported NETGEAR Antennas
A wireless controller system supports the following antennas:
• ANT2409 ProSAFE Indoor/Outdoor 9 dBi Omni-directional Antenna
- 9 dBi omni-directional antenna for indoor or outdoor use
- WiFi signal 802.11g
- Frequency range 2400–2485 MHz
- Maximum range 11.5 km (7.2 miles)
- Polarization vertical
For product documentation and firmware, visit netgear.com/support/product/ANT2409v2.
• ANT224D10 ProSAFE 10 dBi 2x2 Indoor/Outdoor Directional Antenna
- 10 dBi directional antenna for indoor or outdoor use
- WiFi signal 802.11n

NETGEAR ProSAFE WC7500 Specifications

General

Brand	NETGEAR
Model	ProSAFE WC7500
Category	Controller
Language	English