NETGEAR ProSAFE WC7500 User Manual

Troubleshooting and Diagnostics
368
ProSAFE Wireless Controller
Trace a Route to an Access Point
You can trace a route to verify the route from the wireless controller to an access point.
 To trace a route to an access point:
1. Open a web browser, and in the browser’s address field, type the wireless controller’s IP
address.
By default, the IP address is 192.168.0.250.
The wireless controller’s login window opens.
2. Enter your user name and password.
3. Click the Login button.
The wireless controller’s web management interface opens and displays the Summary
page.
4. Select Diagnostics > Tools > Trace Route.
5. From the Access Point menu, select the access point for which you want to trace the route.
After you make your selection, the IP address of the access point displays in the IP
Address field.
6. Click the Start button.
The results are shown in the TraceRoute Result field.

NETGEAR ProSAFE WC7500 Specifications

General

Brand	NETGEAR
Model	ProSAFE WC7500
Category	Controller
Language	English